Lead Edge Feed Flexo Printer Slotter

We are the manufacturer of Lead Edge Feed Flexo Printer Slotter in South India. Lead edge feeder, working speed 80-100 sheets/min.

Product Detials:

Minimum Order Quantity 1 Piece
Brand VMPPM
Machine 9000 x 4000 x 2000mm
Driving Type Electric
Feeding Accuracy +/-1.0mm
Maximum Machine Speed 110 sheet/min
Maximum Printing Area 1350 x 2400mm
Maximum Sheet Size 1400 x 2600mm
Maximum Slotting Depth 7 x 380mm
Minimum Sheet Size 400 x 760mm
Minimum Slotting Space 160 x 160 x 160 x160 mm or 300 x 60 x 300 x 60 mm
Printing Accuracy +/-0.5mm
Printing Die Thickness 5-7mm
Sheet Thickness 4-9mm
Slotting Accuracy +/-1.5mm
Suitable Working Speed 80-100 sheet/min

Features:

  •   Lead edge feeder, working speed 80-100 sheets/min
  •   PLC control system, can store 999 orders’ data. After clean printing die, registration
  •   can return to its last position which is before open the units
  •   Zero reset function
  •   Motorized adjustment of each unit open/close and with alarm ringing. Driven by a motor
  •   All shafts pressure adjusted by hand
  •   Machine wall body thickness 40mm
  •   Main gear thickness 40mm, material adopt 45# steel, ground with high accuracy
  •   Gear system adopt spray lubrication
  •   All shafts coated hard chromium
  •   Strong bearing is used on some important position, to make sure long working life of the machine. Like bearings for anilox roller, doctor roller, printing cylinder, slotting shafts, die cutting cylinder, power transmitting shaft
  •   Electric parts adopt famous brand, like Chint, People, Schneider, Siemens, Omron, etc

Feeding Method:-

  •  Four shaft wheel type lead edge feeder.
  •  Mechanical feeding system, feeding speed display on touch screen.
  •  Bottom vacuum suction to help high feeding precision and vacuum force controlled by frequency inverter.
  •  For different bending degree board, use different vacuum force, save energy.

Sheet Stop Adjustment:-

  •  Electric adjustment of the left & right sheet stop.
  •  Rear stop moving and lifting adjusted by hand.
  •  Front stop adjusted by hand, dial display adjustment distance.

Feeding Roller:-

  •  Top roller is ceramic roller with rough surface, provide light pressure and high force of friction to corrugated sheet, can prevent sheet surface damaged.
  •  Rubber feeding roller is done with dynamic balance test.

Start Protection Device:-

  •  Start protection device of main motor, can keep the main motor stop before all units close.

Control Panel:-

  •  Start protection device of main motor, can keep the main motor stop before all units close.
  •  Emergency stop button installed.
  •  Control panel with buttons for main motor start/stop, speed up/down, Vacuum force increase/down, skip feeding, auto counter.
  •  Four shaft wheel type lead edge feeder.
  •  Mechanical feeding system, feeding speed display on touch screen.
  •  Bottom vacuum suction to help high feeding precision and vacuum force controlled by frequency inverter.
  •  For different bending degree board, use different vacuum force, save energy.
Enquire Now